隨著自動化技術的發展，起初的PLC控制器已經不能滿足一些大工程的要求，在這種情況下DCS控制 系統應運而生。dcs控制系統也稱集散系統，是相對于集中式控制系統而言的一種新型計算機控制系統，它是在集中式控制系統的基礎上發展、演變而來的。在系統功能方面，DCS和集中式控制系統的區別不大，但在系統功能的實現方法上卻完全不同。
 所謂的DCS即分布式控制系統在國內又稱之為集散控制系統，具體不再多說，下面講一下新手如何學習dcs系統，這是所有接觸dcs行業新手共同面臨的問題，下面我就對DCS談?wù)勛约旱囊恍┛捶ǎ?br />  對于DCS，主要關心以下幾個問題： 各部分網絡的通信協議；冗余（服務器，電源，主控
制器，重要I/O模塊）；如何配置，I/O的輸入輸出特性。I/O常用的有模擬量輸入AI，模擬量輸出AO，開關量輸入DI，開關量輸出DO。此外還有SOE，PI等。其中AI信號有RTD（熱電阻信號），TC（熱電偶信號），4-20MA信號（也可以是0-20MA，0-5V）。了解完這些，接下來就是學習組態，多練練修改控制方案，給主控制器下裝方案（不影響生產的情況下進行）。
  再者就是軟硬件結合理解，在實際面對控制現場生產，你很快便會入門。在此以后可以學習DCS系
統與PLC的通信，MIS，SIS。
  對理論知識的建議：自動控制原理（不用深究，了解到PID即可，因?yàn)榫退闶呛芑镜腜ID，現場也未必能投上自動）；常用編程語言（FBD，LD等），這個在組態的過程中自然就學會了；模擬電路和數字電路初步，這個也不用深入；計算機知識，尤其是網絡知識，說到底現在DCS的發展完全是建立在計算機軟硬件飛速發展的基礎上的。 以上僅是南京睿派儀表對大家的一點簡析，希望對你初期學習能夠有所幫助。With the development of automation technology, the original PLC controller can not meet the requirements of some large projects. In this case, DCS control system came into being. DCS control system, also known as distributed system, is a new type of computer control system relative to centralized control system. It is developed and evolved on the basis of centralized control system. In terms of system functions, there is little difference between DCs and centralized control system, but the realization methods of system functions are completely different.
The so-called DCS, i.e. distributed control system, is also called distributed control system in China. I won't say more about it. Now let's talk about how novices learn DCS system, which is a common problem faced by all novices in DCS industry. Here are some of my own views on DCS:
For DCS, the following issues are mainly concerned: the communication protocol of each part of the network; Redundancy (server, power supply, master control
Brake, important i/o module); How to configure i/o input / output characteristics. I/o commonly used analog input AI, analog output Ao, switching input Di, switching output do. In addition, SOE, PI, etc. AI signals include RTD (thermal resistance signal), TC (thermocouple signal), 4-20mA signal (also 0-20mA, 0-5V). After understanding these, the next step is to learn the configuration, practice and modify the control scheme more, and install the scheme for the main controller (without affecting the production).
Moreover, the combination of software and hardware is understood. In the actual face of controlling on-site production, you will soon get started. After that, you can learn DCS system
Communication between system and PLC, MIS, SIS.
Suggestions for theoretical knowledge: automatic control principle (it is OK to understand PID without deep study, because even if it is a very basic PID, it may not be able to be put into automatic on site); Common programming languages (FBD, LD, etc.) are learned naturally in the process of configuration; The analog circuit and digital circuit are preliminary, and there is no need to go deep into this; Computer knowledge, especially network knowledge, in the final analysis, the development of DCS is completely based on the rapid development of computer software and hardware. The above is just a brief analysis of Nanjing Ruipai instrument. I hope it can help you in your initial study.