•多支持15個僅偵聽連接和1個輸出連接
•作為主機，支持同步和凍結命令
•支持羅克韋爾的RSLogix 5000附加配置文件（AOP）
•多可掃描125個從機
•支持和掃描每個從機多122個字的輸入數據和122個字的輸出數據
•可以駐留在本地或遠程CLX機箱中的任何插槽中。多可以有8個掃描儀
在機架中。
•支持所有標準PROFIBUS波特率（9600、19200、31.25k、45.45k、93.75k、，
187.5k、500k、1.5M、3M、6M、12M）
•支持以下DPV1主服務：
•1級：MSAC1\u讀，MSAC2\u寫
•2級：MSAC2\u啟動、MSAC2\u讀取、MSAC2\u寫入、MSAC2\u空閑、，
MSAC2\u中止
•多可同時處理16個1級和16個2級命令
•使用DPV1時，多可以處理16個2級連接（到16個2級DPV1從機）
僅限2類通信
•可作為DPV0從機
•允許同時操作PROFIBUS主設備和從設備（高達12M）
•作為主機，多支持1984字節的輸入數據和1968字節的輸出
4個輸入/輸出頁面中的數據
•作為主機，支持多達256個輸入/輸出模塊的配置
DP Master and Slave Certified (with Profibus Firmware Revision 7.25) • Supports up to 15 listen-only connections plus 1 output connection • As a Master supports Sync and Freeze commands • Supports Rockwell’s RSLogix 5000 Add-on-Profile (AOP) • Can scan up to 125 slaves • Supports and scans up to 122 words of input data and 122 words of output data per slave • Can reside in any slot in the local or remote CLX chassis. You can have up to 8 scanners in a rack. • Supports all standard PROFIBUS baud rates (9600, 19200, 31.25k, 45.45k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M) • Supports the following DPV1 Master services: • Class 1: MSAC1_Read, MSAC2_Write • Class 2: MSAC2_Initiate, MSAC2_Read, MSAC2_Write, MSAC2_Idle, MSAC2_Abort • Can handle up to 16 Class 1 and 16 Class 2 commands simultaneously • Can handle up to 16 Class 2 connections (to 16 Class 2 DPV1 Slaves) when using DPV1 Class 2 Communication only • Can act as a DPV0 slave • Allows for simultaneous operation of PROFIBUS Master and Slave (up to 12M) • As a Master, supports a maximum of 1984 bytes of input data and 1968 bytes of output data with in 4 I/O pages • As a Master, supports configurations with up to 256 I/O modules
客服1