調知識的實用性，幾乎每章中都配有大量實用的例題，便于讀者模仿學，另外每章配有題供讀者訓練之用。大部分實例都有詳細的軟件、硬件配置清單，并配有接線圖和程序。《西門子S7-200PLC完全精通教程》配光盤中有重點內容的程序和操作視頻資料?！段鏖T子S7-200PLC完全精通教程》目錄：篇 基礎入門篇章 可編程控制器（PLC）基礎1.1 概述1.1.1 PLC的主要特點1.1.2 PLC的應用范圍1.1.3 PLC的分類與性能指標1.1.4 PLC與繼電器系統的比較1.1.5 PLC與微機的比較1.1.6 PLC指令本身占有的時間（3）指令條數 6．由于采用集中采樣。集中輸出的方式。存在輸入/輸出滯后的現象，即輸入/輸出響應延遲。 二．PLC與繼電器控制系統、微機區別 1．采用“軟繼電器”代替“硬繼電器”。用“軟件編程邏輯”代替“硬件布線邏輯”。 PLC編程語言有梯形圖、布爾助記符語言，等等。尤其前兩者為常用。 icro/WIN16 V26ES7951-1AJ00-495216用PC/PPI 電纜和自由口通訊功能把 S7-200 CPU 連接到許多和RS-232標準兼容的設備。 有兩種不同型號的 PC/PPI 電纜2.1 軟件安裝和設置2.1.1 安裝條件2.1.2 安裝2.1.3 安裝SP升級包(Service.Pack)2.1.4 Micro/WIN指令庫2.2 STEP7-Micro/WIN簡介2.2.1 STEP7-Micro/WIN窗口元素2.2.2 項目及其組件2.2.3 定制STEP7-Micro/WIN2.2.4 使用幫助2.3 編程計算機與CPU通信2.3.1 設置通信2.3.2 PLC信息2.3.3 實時時鐘2.4 系統塊設置2.4.1 通信口2.4

For the practicality of knowledge adjustment, almost every chapter is equipped with a large number of practical examples, which is convenient for readers to imitate and learn. In addition, every chapter is equipped with questions for readers' training. Most examples have detailed software and hardware configuration lists, and are equipped with wiring diagrams and procedures. The "Siemens S7-200PLC complete proficiency tutorial" is equipped with the program and operation video materials with key contents in the CD. "Siemens S7-200PLC complete proficiency tutorial" directory: Chapter 1 basic introduction chapter 1 programmable controller (PLC) foundation 1.1 overview 1.1.1 main features of PLC 1.1.2 application scope of PLC 1.1.3 classification and performance index of PLC 1.1.4 comparison between PLC and relay system 1.1.5 comparison between PLC and microcomputer 1.1.6 time occupied by PLC instruction itself (3) number of instructions 6. Due to the use of centralized sampling. Centralized output mode. There is input / output lag, that is, input / output response delay. 2、 The difference between PLC and relay control system and microcomputer 1. The difference between PLC and relay control system is that the former works in "serial" mode and the latter works in "parallel". The former uses "software", while the latter uses "hardware". 2. The difference between PLC and microcomputer is that the working mode of the former is "cyclic scanning". The latter works in the "standby or interrupt" PLC programming mode. The outstanding adv through SIMATIC CP 5511 or CP 5611. In this case, the communication rate can be as high as 187.5kbit/s. The S7-200 CPU can be connected to many devices compatible with RS-232 standard by using pc/ppi cable and free port communication function. There are two different models of pc/ppi cable 2.1 software installation and setting 2.1.1 installation conditions 2.1.2 installation 2.1.3 installation of SP upgrade package (service.pack) 2.1.4 micro/win instruction library 2.2 introduction to STEP7 micro / win 2.2.1 STEP7 micro / win window elements 2.2.2 items and their components 2.2.3 customized STEP7 micro / win 2.2.4 using help 2.3 programming computer and CPU communication 2.3.1 setting communication 2.3.2 PLC information 2.3.3 real time clock 2.4 system block setting 2.4.1 communication port 2.4